MEMORY POOL SYSTEM KIT README CONTENTS 1. Introduction 2. What's new; status 3. Getting started 4. The structure of the kit 5. Developing using the kit 6. Testing 7. Building and testing a release 8. Contributing your work 9. Getting help 10. Licensing A. References B. Document history C. Copyright and license 1. INTRODUCTION This is the Memory Pool System Kit -- a complete set of sources for using, modifying, and adapting the MPS. The Memory Pool System (MPS) is a very general, adaptable, flexible, reliable, and efficient memory management system. It permits the flexible combination of memory management techniques, supporting manual and automatic memory management, in-line allocation, finalization, weakness, and multiple concurrent co-operating incremental generational garbage collections. It also includes a library of memory pool classes implementing specialized memory management policies. For a more detailed overview of the MPS, see "The Memory Pool System: Thirty person-years of memory management development goes Open Source" [RB 2002-01-30]. This kit is distributed under an open source license. See under "Licensing", below. This document is a brief introduction to the kit. The readership of this document is anyone who wants to modify, adapt, or extend the MPS. This document is not confidential. 2. WHAT'S NEW; STATUS This is release 1.108.1, made on 2007-12-21. Changes from release 1.108.0: Functional changes to MPS code: Limitation: - if a VM arena (of mps_arena_class_vm) needed to be extended, and the attempt to extend it was refused by the OS (usually because the requested address-space was not available), MPS would not try a smaller extension. Fixed: MPS now tries to extend the arena by successively smaller amounts, until the extension succeeds. Defect discovered: - internal memory-protection state in AMC pools (mps_class_amc) was incorrect for a brief period of time during a collection, which could (theoretically) have caused an assert and failure. However: - during this brief period, the MPS protection cache masks the defect. As a result, we believe this defect is unlikely to be observed in practice (and we have no evidence that it has ever occurred in practice). Fixed: maintain memory-protection state correctly in AMC pools. Other changes: - in the Mac OS X (PowerPC) build, remove outdated compiler flags. The MPS diagnostic system -- which produces diagnostic output for the purpose of helping MPS programmers and client-code programmers -- is undergoing improvement. Some early documentation is at There is a new build variety "di" that emits diagnostics. Note: for further details of this release (including a 'live' report of defects found after these release-notes were written), and details of earlier and later releases, please see: [ Historical: changes in release 1.108.0 (2007-07-05). Functional changes to MPS code: Defect discovered: - an assert could, rarely, be incorrectly triggered when a pool of mps_class_amc is in a constrained memory condition. Fixed: in this rare case, calculate a certain value correctly, such that the assert which checks it is not incorrectly triggered. Defect discovered: - finalization messages could suffer an unnecessary delay, of several full collections (in the worst case), if there were more than 1024 finalization-registered objects; Fixed: the number of finalization-registered objects should no longer cause such a delay, so more finalization messages are likely to be produced by a single collection. - on Mac OS X (PowerPC and Intel), MPS now has memory-protection code, so collections are much faster. - on Mac OS X (Intel), MPS now has stack-scanner code, so the stack may be declared an ambiguous root. (Note: there was already a stack-scanner for Mac OS X PowerPC). - on Mac OS X (PowerPC and Intel), MPS now has locking code, so multiple client threads may use the MPS. (But note: the thread module has not been implemented for Mac OS X, so threads may not yet have their stacks as roots, I think. See: ). Defect discovered: - a macro used only in asserts was incorrect; this could have made some checks ineffective. Fixed: corrected the macro. Other changes: - now builds on FreeBSD 5.5. - now builds on Linux. - on Mac OS X (Intel) default "all" build works (fix broken compile of amsss stress test). ] [ Historical: changes in release 1.107.0 (2006-12-13): Functional changes to MPS code: Defect discovered: - if there was a pool of pool-class LO (leaf-only objects, see mps_class_lo), the mps_arena_formatted_objects_walk() call would fail. Fixed: mps_arena_formatted_objects_walk() will now work. - when MPS starts a garbage collection, it now tells the client by posting a message of the new type mps_message_type_gc_start(). The message includes a textual explanation (for the client programmer) of why this collection was triggered. - hot varieties contain asserts (AVERs and checks) now - hot varieties do not gather statistics Other changes: - the default "all" build now builds mps library and plinth, on all platforms. - Mac OS X on Intel now buildable; see build notes. Some work-in-progress MPS documentation is available; see: manual/wiki/index.html ] [ Historical: changes in release 1.106.2 (2006-04-11): No functional changes to MPS implementation code. Fixed - the "mps.a" library does not (now) contain plinth files; - therefore, if your MPS client code needs the example plinth ("mpsplan.a"), you must link with it explicitly to obtain _mps_lib_assert_fail, _mps_clock, etc; - the default "all" build now succeeds on Unix-like platforms (in 1.106.1 the "all" build only worked on Mac OS X). Fixed Fixed - the default Windows "all" build now works with Visual C++ 6.0. Work on - hopefully fixed some build problems with Visual C++ 7.0. Fixed - there is a "hello-world" example of using the MPS, in: example/hello-world/index.txt ] For more information about the status and progress of the MPS project, consult the project home-page: . 3. GETTING STARTED The MPS Kit is a complete set of sources and documentation to enable third parties to use, modify, and adapt the MPS. For Windows, the kit is distributed as the self-extracting archive "mps-kit-1.108.0.exe", and also as the ZIP archive "mps-kit-1.108.0.zip", which may be unpacked using WinZip. For Unix and Mac OS X, the integration kit is distributed as the tarball "mps-kit-1.108.0.tar.gz". Unpack it using the command "gunzip -c mps-kit-1.108.0.tar.gz | tar xvf -", or by dropping the file onto StuffIt Expander under Mac OS X. The top-level file "index.html" in the sources indexes many other files, and is a good place to start. You should read the user manuals and the high level design documents. A quick start to writing code that uses the MPS is the "hello-world" example: example/hello-world/index.txt 4. THE STRUCTURE OF THE KIT The Integration Kit is a copy of the sources used to develop and maintain the MPS at Ravenbrook Limited . The "sources" are all the things that go to make up the product, not just source code files. For example, the sources for the manuals are here too, because we maintain them in parallel with the code. The sources at Ravenbrook are mirrored from our Perforce configuration management server onto our internal web server at info.ravenbrook.com, and are designed to be browsed on that server. You will find HTML documents which index many of the directories. Read these, starting with the top level "index.html". You might find some links to "info.ravenbrook.com" or "/project/mps/...". Sorry about that -- it's partly due to the nature of HTML links. You will find most project documents from the MPS Project page , including many documents which aren't "sources" but may still be useful to understand the history of the project. Some project documents are client confidential. The MPS project has a long history, and it will take some time to sort through the documents to see which can be published. If there's a particular document you want to see, please write to us and we'll see what we can do. Many documents are referenced by tags, which look like "design.mps.buffer" or "req.dylan". These are references to the obsolete Memory Management Information System [RB 2002-06-18]. We are working on translating these documents to HTML. There are a vast number. We've only been able to include a few key documents in the open source release so far. 5. DEVELOPING USING THE KIT The MPS can be built on a wide variety of platforms. For Unix-like platforms you will need the GNU Make tool. Some platforms (such as Linux and Mac OS X) have GNU Make as their default make tool. For others you will need to get and install it. (It's available free from .) On Windows platforms the NMAKE tool is used. This comes with Microsoft Visual C++. The MPS uses a 6 character platform code to express a combination of OS/CPU architecture/compiler toolchain. Each 6 character code breaks down into 3 groups of 2 characters, like this: OSARCT Where OS denotes the operating system, AR denotes the CPU architecture, and CT denotes compiler toolchain. Table 1 lists the platforms that we have regular access to and on which the MPS works well. Table 1. MPS makefiles and platforms Makefile OS Architecture Compiler fri4gc.gmk FreeBSD Intel IA32 GCC lii4gc.gmk Linux Intel IA32 GCC xcppgc.gmk Mac OS X PowerPC GCC w3i3mv.nmk Windows Intel IA32 Microsoft C Historically the MPS has worked on a much wider variety of platforms and still would if we had access to them. The MPS has worked on various combinations of operating systems, IRIX / OSF/1 (Tru64) / Solaris / SunOS / Class Mac OS, CPU architectures, MIPS / PowerPC / ALPHA / SPARC v8 / SPARC v9, and compiler toolchains, Metrowerks Codewarrior / SunPro C / Digital C. The full list of platforms that were supported historically is available in manual/build-notes/ . To build all MPS targets on Unix-like platforms, change to the "code" directory and type: make -f where "make" is the command for GNU Make. (Sometimes this will be "gmake" or "gnumake".) To build just one target, type: make -f To build a restricted set of targets for just one variety, type: make -f 'VARIETY=' For example, to build just the "cool internal" variety of the "amcss" test on FreeBSD: gmake -f fri4gc.gmk 'VARIETY=ci' amcss On Windows platforms you need to run "VCVARS32.BAT" to initialize your environment variables. Then type: nmake /f w3i3mv.nmk To build just one target, type: nmake /f w3i3mv.nmk And so on. The output of the build goes to a directory named after the platform (e.g. "fri4gc") so that you can share the source tree across platforms using NFS, for example. Building generates "mps.a" or "mps.lib" or equivalent, a library of object code which you can link with your application, subject to the MPS licensing conditions (see under "Licensing", below). It also generates a number of test programs, such as "amcss" (a stress test for the Automatic Mostly-Copying pool class). 6. TESTING There is an extensive regression test suite in the "test" directory, but we have not yet had time to make it easy to run. 7. BUILDING A RELEASE The procedure for building a release of the MPS is in "procedure/release-build". This will only be of interest if you are intending to maintain and publish a variant of the MPS. If you do want to do this, please get in touch with us to discuss it. 8. CONTRIBUTING YOUR WORK We'd like to include improvements to the MPS in the distributions from Ravenbrook Limited. Please consider putting your work under a compatible open source license and sending it to us. It will help a great deal if your work is self-consistent. This means that the documentation is up to date (even if only with sketchy but accurate notes) and the procedures have been maintained. 9. GETTING HELP You can obtain expert professional support for the MPS from Ravenbrook Limited , the developers of the MPS, who have many years of experience in commercial memory management systems. Write to us for more information. You might also want to join the MPS discussion mailing list. To join, send a message with the word "subscribe" in the body to mps-discussion-request@ravenbrook.com or send the word "help" for general information. 10. LICENSING The MPS is distributed under an open source license (see the file "license.txt"). The license is designed to make it possible for you to use the MPS in your own projects, provided that you either don't distribute your product, or your product is open source too. If you are developing a closed source product and want to use the MPS you must license under commercial terms from Ravenbrook Limited . Please write to us for more information. A. REFERENCES [RB 2002-01-30] "The Memory Pool System: Thirty person-years of memory management development goes Open Source"; Richard Brooksby; Ravenbrook Limited; 2002-01-30; . [RB 2002-06-18] "The Obsolete Memory Management Information System"; Richard Brooksby; Ravenbrook Limited; 2002-06-18; . B. DOCUMENT HISTORY 2002-05-20 RB Original author: Richard Brooksby, Ravenbrook Limited. 2002-05-20 RB Created based on template from P4DTI project. 2002-06-18 NB Minor updates and corrections. 2002-06-18 RB Removed obsolete requirement for MASM. 2002-06-19 NB Added note on self-extracting archive 2006-01-30 RHSK Update from "1.100.1" to "1.106.1". 2006-03-30 RHSK Add section 2: What's new. 2006-04-11 RHSK Update from "1.106.1" to "1.106.2". 2006-04-14 RHSK Merge updates from version/1.106 back to master. 2006-06-29 RHSK Note fixed job001421, job001455. 2006-12-13 RHSK Release 1.107.0 2007-07-05 RHSK Release 1.108.0 C. COPYRIGHT AND LICENSE Copyright (C) 2001-2002, 2006-2007 Ravenbrook Limited. All rights reserved. . This is an open source license. Contact Ravenbrook for commercial licensing options. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Redistributions in any form must be accompanied by information on how to obtain complete source code for this software and any accompanying software that uses this software. The source code must either be included in the distribution or be available for no more than the cost of distribution plus a nominal fee, and must be freely redistributable under reasonable conditions. For an executable file, complete source code means the source code for all modules it contains. It does not include source code for modules or files that typically accompany the major components of the operating system on which the executable file runs. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. $Id: //info.ravenbrook.com/project/mps/release/1.108.1/readme.txt#1 $